Turing The Measuring Cell Against Housing - Siemens SITRANS P DS III Operating Instructions Manual

Installing / mounting

4.6 Turing the measuring cell against housing

Key
p
MA
p
ME
ρ
FL
ρ
oil
g
H
U
H
O
H
V
4.6 Turing the measuring cell against housing
Description
You can turn the measuring cell against the housing. Rotating the pressure transmitter
facilitates its operation when it is installed at an angle, for example. The buttons and the
current connection can thus also be operated for an external measuring device. The display
also remains visible in enclosure covers with an inspection window.
Only limited turning is permissible! The turning range
electronic housing. An orientation mark
This mark must remain in the marked section when turning.
①
②
③
Image 4-4
The turning range for pressure transmitters for differential pressure and flow rate, absolute
pressure from the differential pressure series and level is identified in a similar manner.
60
Start of scale value
Full-scale value
Density of the process medium in the container
Density of the filling oil in the capillary line of the remote seal
Acceleration due to gravity
Lower filling level
Upper filling level
Gland distance
Turning range
Retaining screw
Orientation mark
Example: Turning range of pressure transmitters for pressure and absolute pressure
from the gauge pressure series
①
is marked at the foot of the
③
is provided at the throat of the measuring cell.
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08