Siemens SITRANS P DS III Operating Instructions Manual page 220

Technical data
13.8 Construction
Construction for gauge pressure, with flush mounted diaphragm
Electrical connection
Degree of protection for Han and
M12 connectors
Han 8D is identical to Han 8U.
1)
Construction of pressure transmitter with PMC connection
Weight
Material
Wetted parts materials
•
Gasket (standard)
O-ring (minibolt)
Seal diaphragm
Non-wetted parts materials
•
Electronics housing
Mounting bracket
Measuring cell filling
Process connection
Standard
•
Minibolt
•
220
Cable inlet using the following cable glands:
Pg 13.5
•
M20x1.5
•
½-14 NPT
•
Han 7D/Han 8D plug
• 1)
M12 connector
•
IP65
Approx. 1.5 kg (3.3 lb) for aluminum enclosure
PTFE flat gasket
FPM (Viton)
•
FFPM or NBR (optional)
•
Hastelloy C276, mat. No. 2.4819
Non-copper aluminum die casting GD-AlSi 12 or stainless steel precision cast-
•
ing, mat. no. 1.4408
Standard: Powder coating with polyurethane
•
Option: 2 coats: Coat 1: epoxy-based; coat 2: polyurethane
Stainless steel nameplate
•
Steel or stainless steel
Silicone oil
•
Inert liquid
•
Flush mounted
•
1 / ''
• 1
2
PMC Standard design
•
Flush mounted
•
1''
•
PMC Minibolt design
•
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08