Replacing A Device; Making Settings Locally - Siemens SITRANS P DS III Operating Instructions Manual

See also
Overview (Page 150)
8.7.9

Replacing a device

Replacing a PROFIsafe device with firmware <= 0301.02.02 or a PROFIBUS device with a
PROFIsafe device with firmware 0301.02.03 or higher
When shipped, PROFIsafe is disabled on the replacement device.
Requirement
Import the PROFIsafe EDD as of version 01.02.03 to the device catalog of SIMATIC PDM.
Process
1. Replace the device.
2. Configure the device. You have two options:

– Making settings locally

– Host system
The EDD of the new device must be reassigned to that of the replaced PDM object. Making
the reassignment in the "Process Devices - Network View" of the SIMATIC Manager.
8.7.9.1 Making settings locally
Procedure
1. Set mode 16.
2. Set the device mode [129] with the [↑] and [↓] keys.
3. Save with the [M] key.
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08
Functional safety
8.7 PROFIsafe
161