Siemens SITRANS P DS III Operating Instructions Manual page 219

Construction for gauge pressure and absolute pressure (from the gauge pressure series)
Measuring cell filling
Process connection
Electrical connection
Degree of protection for Han and
M12 connectors
Han 8D is identical to Han 8U.
1)
Construction for gauge pressure, with flush mounted diaphragm
Weight
Material
Wetted parts materials
•
Process connection
Seal diaphragm
Non-wetted parts materials
•
Electronics housing
Mounting bracket
Measuring cell filling
Process connection
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08
Silicone oil
•
Neobee M20
•
Inert liquid
•
(max. 120 bar g (2320 psi g) for oxygen measurement)
G / B connection pin in accordance with DIN EN 837-1; female thread
1
2
or oval flange (PN 160 (MAWP 2320 psi g)) with M10 fastening screw thread in
accordance with DIN 19213 or
thread M20 x 1.5 and / -14 NPT
1
2
Cable inlet using the following cable glands:
Pg 13.5
•
M20 x 1.5 and ½-14 NPT or Han 7D/Han 8D connector
•
– Cable diameter: 6 to 12 mm; types of protection "nA" and "ic" (Zone 2): 8 to
12 mm or a suitable cable gland for smaller diameters
M12 connector
•
IP65
Approx 1.5 ... 13.5 kg (3.3 ... 30 lb) with aluminum enclosure
Stainless steel, mat. no. 1.4404/316L
Stainless steel, mat. no. 1.4404/316L
Non-copper aluminum die casting GD-AlSi 12 or stainless steel precision cast-
•
ing, mat. no. 1.4408
Standard: Powder coating with polyurethane
•
Option: 2 coats: Coat 1: epoxy-based; coat 2: polyurethane
Stainless steel nameplate
•
Steel or stainless steel
Silicone oil
•
Neobee M20
•
Inert liquid
•
Flanges as per EN and ASME
•
F&B and Pharma flange, clamp and threaded connectors
•
NEUMO BioConnect/BioControl
•
PMC connections for the paper industry
•
/ -20 UNF in accordance with EN 61518. Male
7
16
Technical data
13.8 Construction
/ -14 NPT
1
2
1)
219