Sitrans P Ds Iii (Flush-Mounted) - Siemens SITRANS P DS III Operating Instructions Manual

⑦
Locking screw with valve (option)
⑧
Harting adapter
⑨
Process connection: Minus side ¼-18 NPT (IEC 61518)
Take an additional 20 mm (0.79 inches) thread length into account
1)
Not with "flameproof enclosure" type of protection
2)
Not for "FM + CSA [is + XP]" type of protection
3)
92 mm (3.62 inches) minimum distance for rotating the enclosure with pointer
4)
For Pg 13.5 with adapter, approx 45 mm (1.77 inches)
5)
SITRANS P410 is only available as gauge pressure and differential pressure version.
6)
Image 14-4 Pressure transmitter SITRANS P DS III/P410 for level, including mounting flange, dimensions in mm (inches)
14.4

SITRANS P DS III (flush-mounted)

①
②
③
④
⑤
⑥
⑦
1)
2)
3)
Image 14-5
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08
Electronics side, display
(longer for cover with inspection window)
Connection side
1)
Electrical connection:
M20 x 1.5 gland
•
½-14 NPT gland
•
M12 connector
•
Protective cap of the operating buttons
Blanking plug
Safety catch
(only for "flameproof enclosure" type of protection, not shown in the drawing)
Process connection: see Flange table
In addition, allow approx. 20 mm (0.79 inch) for the thread length
92 mm (3.6 inches) minimum distance for rotating the enclosure with display
SITRANS P410 is only available as gauge pressure and differential pressure version.
SITRANS P DS III/P410 (flush mounted)
14.4 SITRANS P DS III (flush-mounted)
1)
Dimension drawings
235