Turing The Measuring Cell Against Housing - Siemens SITRANS P DS III Operating Instructions Manual

Installing/mounting

4.6 Turing the measuring cell against housing

Installation type J
Key
p
MA
p
ME
ρ
FL
ρ
oil
g
H
U
H
O
H
V
4.6 Turing the measuring cell against housing
Description
You can turn the measuring cell against the housing. Turning simplifies the transmitter
operation in the case of an angled installation environment. The buttons and the current
connection can thus also be operated for an external measuring device. The display also
remains visible in enclosure covers with an inspection window.
Only limited turning is permissible! The turning range
electronic housing. An orientation mark
This mark must remain in the marked section when turning.
56
Between the measuring points, no
vacuum
Start of scale value
Full-scale value
Density of the process medium in the container
Density of the filling oil in the capillary line of the remote seal
Acceleration due to gravity
Lower filling level
Upper filling level
Gland distance
H ≤ 7 m (23 ft); with halocarbon oil as the filling
2
liquid, only H ≤ 4 m(13.1 ft)
2
Start of scale value:
p = ρ * g * H - ρ
MA FL U oil
Full-scale value:
p = ρ * g * H - ρ
ME FL O
①
is marked at the foot of the
③
is provided at the throat of the measuring cell.
Operating Instructions, 06/2013, A5E00047092-09
* g * H
V
* g * H
oil V
SITRANS P DS III with HART