3. Connect the wires to the terminals "+" and "-"
The device is not polarity sensitive.
4. If necessary, ground the shield to the screw of the ground terminal
terminal is electrically connected to the external protective conductor connection.
①
②
③
④
⑤
⑥
⑦
Image 5-1
Closing the device
1. Screw the covers
2. Secure each cover with the cover catch
3. Close the key cover
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08
PROFIBUS PA/FOUNDATION™ Fieldbus FF
Cable entry
Connecting terminals
Safety catch
Protective conductor connector/equipotential bonding terminal
Process connection
Grounding terminal
Electrical connection, power supply
④⑦
back on as far as they will go.
①
.
③
.
③⑥
.
Connecting up
5.2 Connecting the device
⑧
. The ground
67