Unit - Siemens SITRANS P DS III Operating Instructions Manual

Operation
6.5 Local operation
Table 6- 7
Source of measured value display
From analog input function block:
[0] : Output
From pressure transducer block:
[1] : Secondary variable 1
[2] : Measurement value (primary
variable)
[3] : Sensor temperature
[4] : Electronics temperature
Table 6- 8
Source of measured value display
From analog input function block:
[0] : Output
From pressure transducer block:
[1] : Secondary variable 1
[2] : Measurement value (primary
variable)
[3] : Sensor temperature
[4] : Electronics temperature
See also
Block model for collection and processing of measured values (Page 95)
Pressure transducer block (transducer block 1) (Page 98)
6.5.7

Unit

Introduction
In mode 14, set the physical unit in which the device's measured value display should be
represented.
Requirement
You have already selected the desired source for the measured value display in mode 13.
84
Measurement type "Level (height)"
Measurement type "Level (volume)"
Variable Available units
OUT (L) Level
(U) User specific
SEC 1 (P) Pressure
PRIM (L) Level
TMP S (T) Temperature
TMP E (T) Temperature
Variable Available units
OUT (V) Volume
(U) User specific
SEC 1 (P) Pressure
PRIM (V) Volume
TMP S (T) Temperature
TMP E (T) Temperature
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08