Replacing The Display; Remove Existing Display - Siemens SITRANS Probe LU240 Compact Operating Instructions

Service and maintenance
8.3 Maintenance and repair work
8.3.1

Replacing the display

8.3.1.1

Remove existing display

To remove display for wiring or to replace a damaged display, follow steps below:
1. Turn lid by hand in a counter-clockwise direction to remove it from device.
2. Remove display by gently turning the display a quarter turn counter-clockwise, to free it
from the enclosure.
3. Pull up to disconnect display cable from connector. The display is now free to lift out of
enclosure.
(Dispose of a damaged display according to local regulations.)
44
SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 09/2021, A5E42673704-AE