Sd Card Appli Move; Overview - Ricoh G108 Service Manual

SD CARD APPLI MOVE

5.3 SD CARD APPLI MOVE

5.3.1 OVERVIEW

Slot 1 refers to the upper SD-card slot [A]. Slot 2
refers to the lower SD-card slot [B].
The service program "SD Card Appli Move" (Engine
SP5-873) allows you to copy application programs
from one SD card to another SD card.
There are two SD card slots. The machine can use
either or both Slot 1 and Slot 2 for the storage of
application programs. Slot 1 can also be used for
product maintenance. When necessary application
programs are stored in three SD cards or more, you
must choose two of the SD cards and
application programs in just these two cards
( 5.3.2).
Use extreme caution when you use SD Card Appli
Move:
• The authentication data is transferred with the
application program from one SD card (in Slot 1)
to the other SD card (in Slot 2).
• Do not use an SD card if it is already being used for some other purpose. Normal
operation is not guaranteed when such an SD card is used.
• Keep the SD card in a safe place after you copy the application program from the
card. This is because:
licensed to use the application program.
and its data to solve a problem in the future.
• You cannot copy PostScript data to another SD card. You can copy an
application program to the SD card that saves PostScript data.
G108
save all
The SD card can be the only proof that the user is
5-44
[C]
You may need to check the SD card
[A]
[B]
G108S902.WMF
SM