Table of Contents
Advertisement
Removing the 2U chassis fan assembly
To remove the 2U chassis fan assembly, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. If the chassis that contains the fan assembly is installed in an iDataPlex rack,
3. Remove any installed system-board trays (see "Removing the system-board tray
4. Remove the top cover (see "Removing the 2U chassis fan-assembly top cover"
5. Grasp the tab at each end of the fan assembly and lift it out of the chassis.
6. If you are instructed to return the fan assembly, follow all packaging instructions,
Fan assembly
on page 123.
remove it (see "Removing the 2U chassis from a Type 7825 iDataPlex rack" on
page 186).
from a 2U chassis" on page 126).
on page 135).
and use any packaging materials for shipping that are supplied to you.
Chapter 5. Removing and replacing server components
133
Advertisement
Table of Contents
