IBM System x iDataPlex dx360 M2 Problem Determination And Service Manual page 38

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 4, "Parts listing," on page 109 to determine which components are customer replaceable
units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code Description
00580A5 Mirror failover complete
0068002 CMOS battery cleared
2011000 PCI-X PERR
2011001 PCI-X SERR
2018001 PCI Express uncorrected or
uncorrected error
22
System x iDataPlex dx360 M2: Problem Determination and Service Guide
Action
Information only. Memory redundancy has been lost. Check
the event log for uncorrected DIMM failure events (See
"Event logs" on page 25 for more information).
1. Reseat the battery.
2. Clear the CMOS memory (see "Clearing CMOS memory"
on page 77).
3. Replace the following components one at a time, in the
order shown, restarting the system-board tray each time:
a. Battery
b. (Trained service technician only) System board
1. Check the riser-card LEDs.
2. Reseat all affected adapters and riser cards.
3. Update the PCI device firmware.
4. Remove both adapters from the riser card.
5. Replace the following components one at a time, in the
order shown, restarting the system-board tray each time:
a. Riser card
b. (Trained service technician only) System board
1. Check the riser-card LEDs.
2. Reseat all affected adapters and riser cards.
3. Update the PCI device firmware.
4. Remove both adapters from the riser card.
5. Replace the following components one at a time, in the
order shown, restarting the system-board tray each time:
a. Riser card
b. (Trained service technician only) System board
1. Check the riser-card LEDs.
2. Reseat all affected adapters and riser cards.
3. Update the PCI device firmware.
4. Remove both adapters from the riser card.
5. Replace the following components one at a time, in the
order shown, restarting the system-board tray each time:
a. Riser card
b. (Trained service technician only) System board