Removing An Ibm Virtual Media Key - IBM System x iDataPlex dx360 M2 Problem Determination And Service Manual

10. Install the storage-riser-card assembly and ServeRAID SAS controller (see
11. Install the top cover (see "Installing the 3U chassis top cover" on page 137).
12. Install the 3U chassis in the iDataPlex rack (see "Installing the 3U chassis top

Removing an IBM virtual media key

160
System x iDataPlex dx360 M2: Problem Determination and Service Guide
8. Route the battery cable through the system-board tray and the 3U chassis.
9. Install the 3U chassis fan assembly and route the battery cable through the fan
assembly (see "Installing the 3U chassis fan assembly" on page 150).
"Installing a storage-riser-card assembly, ServeRAID SAS controller, and
battery cable interposer card in a 3U chassis" on page 183).
cover" on page 137).