IBM System x iDataPlex dx360 M2 Problem Determination And Service Manual page 228

10. Install the system-board tray in the chassis (see "Installing the system-board
212
System x iDataPlex dx360 M2: Problem Determination and Service Guide
6. Install the hard disk drive bracket and cable assembly (see "Removing and
installing a one-bay or four-bay hard disk drive bracket and cable assembly" on
page 168).
7. Reinstall the 2.5-inch SAS/SATA drive cage, if you removed one (see
"Installing a 2.5-inch SAS/SATA drive cage" on page 148).
8. Reinstall the hard disk drives, if you removed any (See "Removing and
installing a hard disk drive" on page 139).
9. Install the expansion enclosure, if you removed one (see "Installing an
expansion enclosure on a system-board tray" on page 132); otherwise, install
the system-board tray cover (see "Installing the system-board tray cover" on
page 125).
tray in a 2U chassis" on page 127 or "Installing the system-board tray in a 3U
chassis" on page 129).