I/O Enclosures Configured With 3.5-Inch Simple-Swap Hard Disk Drives - IBM System x iDataPlex dx360 M2 Problem Determination And Service Manual

Table 7. CRUs and FRUs, I/O enclosures configured with 2.5-inch hot-swap hard disk drives (continued)
Index Description
2
2 I C multiplexer card
3 2x2 2.5-inch SAS/SATA backplane
4 I/O enclosure
5 PCIe adapter (see Table 4 on page 110 for the supported adapters)
6 PCIe adapter bay cover
7 Two-slot PCIe riser-card assembly (2x4 with 2x16 connectors)
8 2.5-inch hot-swap drive filler panel
SAS hard disk drive (see Table 4 on page 110 for the supported
9
drives)
10 2.5-inch SAS/SATA drive cage with backplane

I/O enclosures configured with 3.5-inch simple-swap hard disk drives

The following replaceable components are available for I/O enclosures that are
configured with 3.5-inch simple-swap hard disk drives.
Table 8. CRUs and FRUs, I/O enclosures configured with 3.5-inch simple-swap hard disk drives
Index Description
1 Power-supply paddle card domain B
2 I/O enclosure
3 PCIe adapter (see Table 4 on page 110 for the supported adapters)
4 PCIe adapter bay cover
CRU part CRU part
number number
(Tier 1) (Tier 2)
44W4832
46C6930
26K8680
44W4800
CRU part CRU part
number number
(Tier 1) (Tier 2)
39Y7311
46C6930
Chapter 4. Parts listing
FRU part
number
44E8765
46C6929
46D1336
FRU part
number
46C6929
117