Test Print Mode - SATO LM408 Operator's Manual

TEST PRINT MODE

Provides the specific sequence of events required by the operator, the printer, and the printer's software for a test
label to be printed. Test labels are designed to identify failures in configuration, adjustments problems, and
mechanical defects.
Use the keys of the printer's operator panel to select and enter the required options. Refer to the Menu Definition
Tables in the following chapter to provide an explanation of each menu screen.
LM408-412e Operator Manual
Unit 4: Printer Configuration
FEED + POWER
TEST PRINT MODE
CONFIGURATION
BARCODE
HEADCHECK
MEMORY
Scrolls
FACTORY
options
LINE
Configuration
Memory
Barcode
FEED
Headcheck
FEED
TEST PRINT SIZE
XXCM
Scrolls
LINE
options
FEED
Test
printing
begins
PRESS FEED KEY
TO STOP PRINTING
FEED
Test
printing
stops
Power printer off
and then on again
to exit
Figure 4-10, Test Print Mode
4-13
Factory
FEED
PRINT SIZE
SMALL LARGE
PN: 9001155A