To Bind Copies At The Center ("Fold & Staple") - Konica Minolta BIZHUB C250 User Manual

Basic copy operations
To bind copies at the center ("Fold & Staple")
0 When the "Fold & Staple" setting is selected, the following default set-
tings are automatically selected.
"1→2", "Left" Page Margin setting, "Booklet"
Recommended zoom ratio when a Booklet setting is selected (×0.707)
0 If "Yes" is selected under "Center Erase", an area of 10 mm along the
binding is erased.
0 If paper misfeeds often occur when "No" is selected under "Center
Erase", select "Yes" to reduce the number of paper misfeeds.
1
In the Basic screen, touch [Fold & Staple].
The Center Erase screen appears.
2
Touch the button for the desired Center Erase setting.
– To erase the area along the center, touch [Yes]. To not erase the
area along the center, touch [No].
– To cancel the "Fold & Staple" setting, touch [OFF].
– To cancel changes to the settings, touch [Cancel].
3
Touch [OK].
The Basic screen appears again.
C250
3
3-77