HYDRAULIC BRAKE
REAR MASTER CYLINDER/
BRAKE PEDAL
15 .. 12
CAUTION:
•Avoid spilling fluid on painted, plastic or rubber
parts. Place a rag over these parts whsnever the
system is serviced.
• When removing the oil bolt, cover the end of the
hose to prevent contamination.
DISASSEMBLY
Drain the brake fluid from the rear brake hydraulic
system (page 15-3).
Disconnect the brake hose from the master cylinder
by removing the oil bolt and sealing washers.
Remove the screw and reservoir hose joint from
the master cylinder.
Remove the 0-ring.
Loosen the master cylinder mounting bolts.
Remove the footpeq bracket bolts and footpeg
bracket assembly.
Remove the rear brake light switch spring and
brake pedal return spring.
Remove the brake light switch from the footpeg
bracket.