Honda C8R600F4 Service Manual page 287

Lower the caliper and install the pad pin.
Install and tighten the rear brake caliper bolt.
TORQUE:
23 N-m (2.3 kgf·m, 17 lbf·ft)
Tighten the pad pin.
TORQUE: 18 N-m (1.8 kgf.m, 13 lbf.ft)
Install and tighten the pad pin plug.
TORQUE : 3
N·m
(0.3
kgt·m ,
2.2 I bf·
ft)
Operate the brake pedal to seat the caliper piston
against the pads.
BRAKE DISC INSPECTION
Visually inspect the disc for damage or cracks.
Measure the brake disc thickness at several points.
SERVICE LIMITS: Front: 3.5 mm (0.14 in)
Rear:
4.0 mm (0.16 in)
Measure the brake disc warpage with a dial indica-
tor.
SERVICE LIMIT: 0.30 mm (0.012 in)
Check the wheel bearing for excessive play, if the
warpage exceeds the service limit.
Replace the brake disc ifthe wheel bearings are nor-
mal.
HYDRAULIC BRAKE
15-7