Honda C8R600F4 Service Manual page 247

FRONT WHEEL/SUSPENSION/STEERING
Apply fork fluid to a new dust seal lip and install the
dust seal into the fork slider.
Install the fork protector over the fork slider by
aligning the tab with the slider groove.
Pour the specified amount of recommended fork
fluid in the fork tube.
RECOMMENDED FORK FLUID:
Pro-Honda Suspension Fluid SS-8
FORK FLUID CAPACITY:
475
±
2.5
cm'
(16.1
±
U.08
us
oz,
16./
±
0.09 OZ)
Pump the damper rod several times until the fork
fluid flows out of the oil hole in the rebound damp-
ing adjuster.
Slowly pump the fork tube several times to remove
trapped air.
Cornf.m:i:;:; lhe fork tube fully.
Measure the oil level from the top of the fork tube.
OIL LEVEL: 118 mm (4.6 in)
Pull up the damper rod fully.
Install the fork spring with the tightly wound end
facing down.
Coat new 0-ring with fork fluid and install it into the
groove in the rebound damping adjuster.
Install the spring seat, joint collar and joint plate.
LEVEL
13-19