Honda C8R600F4 Service Manual page 331

Install new 0-rings onto the motor case bolts.
Install and tighten the motor case bolts.
INSTALLATION
Coat a new 0-ring with oil and install it into the
starter motor groove.
Install the starter motor into the crankcase.
Install the ground cable and mounting bolts, and
tighten the bolts securely.
Connect the starter motor cable.
Install and tighten the terminal nut.
TORQUE: 10 N·m (1.0 kgf·m, 7 !bf.ft)
Install the rubber cap securely.
Connect the water hose to the water pump.
Install the fuel tank (page 2-3).
Fill and bleed the cooling system (page 6-4).
ELECTRIC STARTER
WATER HOSE
18-9