Front Wheel/Suspension/Steering - Honda C8R600F4 Service Manual

13. FRONT WHEEL/SUSPENSION/STEERING
SERVICE INFORMATION
TROUBLESHOOTING
HANDLEBAR
SERVICE INFORMATION
GENERAL
IMf.hWO@
13-1
13-2
13-3
FRONT WHEEL
FORK
STEERING STEM
13-6
13-12
13-21
• Riding on damaged rims impairs safe operation of the vehicle.
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc
with a high quality brake degreasing agent.
•A hoist or equivalent is required to support the motorcycle when servicing the front wheel, fork and steering stem.
• Refer to section 15 for brake system service.
SPECIFICATIONS
Unit: mm (in)
ITl::IVI STANDARD SERVICE LIMIT
~-~-
Minimum tire tread depth i 1.5 (0.06)
Cold tire pressure
Up to 90 kg (200 lbs) load -·~50
kP_?J2. 50 __
~gJL~r.n:~si)
-·-··-
Uo to maximum weioht caoacitv 250 kPa (2.50 kof/cm
2 ,
36 osi)
Axle runout
Wheel rim runout Radial
Axial
--wileel balance wei )ht
Fork
Spring free length
Tube runout
Recommended fluid
Fluid level
Fluid capacity
Steerina head bearina preload
TORQUE VALUES
Handlebar weight mounting screw
Front brake disc bolt
Fru11L
<:1xle
bull
Front axle holder bolt
Front fender bolt
Fork socket bolt
Fork cap
Fork top bridge pinch bolt
Fork bottom bridge pinch bolt
Steering bearing adjustment nut
Steering stem nut
Front brake hose clamp bolt (steering stem)
Front master cylinder mounting bolt
Front brake caliper mounting bolt
0.2 (0.01)
2.0 (0.08)
2.0 (0.08)
-~Q._g
(2.1 oz) max.
336 mm (13.2 in) 329.3 (12.96)
0.20 (0.008)
Pro-Honda Suspension Fluid SS-B
118 mm (4.6 in)
475
±
2.5 cm
3
(16.1
±
0.08 US oz,
16.7
±
0.09 oz)
1.0-1.b kat (2.2-3.3 lbf)
10 N·m (1.0 kgf.m, 7 !bf.ft) ALOC screw: replace with a new one
20 N·m (2.0 kgf·m, 14 lbf.ft) ALOC bolt: replace with a new one
59 N·m (0.0 kgf·m , 43 lbf·ftl
22 N·m (2.2 kgf.m, 16 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf.ft)
34 N·m (3.5 kgf.m , 25 lbf·ft)
23 N·m (2.3 kgf.m, 17 lbf.ft)
23 N·m (2.3 kgf·m, 17 lbf·ft)
39 N·m (4.0 kgf.m, 29 fbf·ft)
25 N.m (2.5 kgf.m, 18 lbf.ft) Apply oil to
thA threarls ;:;nrl
sP.;:;ting surface
103 N·m (10.5 kgf·m, 76 lbf·ftl
10 N·m (1.0 kgf.m, 7 !bf.ft)
12 N·m (1.2 kgf.m, 9 lbf.ft)
30 N·m (3.1 kgf·m, 22 lbf·ft) ALOC bolt: replace with a new one
m
13-1