Honda C8R600F4 Service Manual page 249

FRONT WHEEL/SUSPENSION/STEERING
Tighten the fork cap to the specified torque if it was
removed.
TORQUE : 23 N·m (2.3 kgf·m, 17 lbf.ft)
Install the handlebar.
Install the stopper ring.
Make sure that the handlebar boss is positioned in
the fork top bridge groove.
Tighten the handlebar pinch bolt.
Right fork:
Secure the handlebar switch wire with the wire
band.
I
Aft
fork:
SAc:ure the handlebar switch and horn wires with
the wire bands (page 1-18).
Install the front wheel (page 13-11).
STEERING STEM
REMOVAL
Remove the front wheel (paqe 13-6).
Remove the left air intake duct (page 2-6).
Release the wire band and disconnect the ignition
switch 4P (White) connector.
Remove the bolt and front brake hose clamp.
Disconnect the horn connectors.
Remove the bolt and horn.
Remove the forks (page 13-12).
13 .. 21