FUEL SYSTEM
SE VALVE
Install the spring over the SE valve and install it
into the SE valve hole in the carburetor.
Install the valve nut and tighten it.
TORQUE:
2
N·m (0.2 kgf.m, 1.4 lbf.ft)
AIR FUNNEL
Install a new 0-ring into the groove in the carbure-
tor body.
Set the air fonnel through the funnel holder as
shown and install them by aligning the cut-outs in
the funnel with the lugs of the carburetor body.
Be careful not to
Install the four screws and tighten them.
ptnch the O·rtng.
CARBURETOR COMBINATION
THROTTLE STOP SCREW