Brake Pads Wear - Honda C8R600F4 Service Manual

REAR BRAKE
Place the motorcycle on a level surface and support
it upright.
Check the fluid level in the rear brake reservoir.
If the level is near the lower level line, remove the
reservoir mountinq bolt and the reservoir cap. and
fill the reservoir with DOT 4 brake fluid from a
sealed container to the upper level line.
Install the reservoir cap.
Install the reservoir onto the stay with the mount-
ing bolt.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf.ft)
BRAKE PAD WEAR
FRONT BRAKE PAD
ChP.r.k thF! hr::ikP. p::irl for WF!M_
Replace the brake pads if the wear limit groove of
either pad is worn out.
REAR BRAKE PAD
Check the brake pad for wear by looking from the
rear side ot the caliper.
Replace the brake pads if either pad is worn to the
bottom of the wear limit groove.
Refer to page 15-5 for brake pad replacement.
MAINTENANCE
WEAR LIMIT GROOVES
WEAR LIMIT GROOVES
3-?1