Honda C8R600F4 Service Manual page 276

REAR WHEEL/SUSPENSION
ASSEMBLY
LEFT PIVOT INNER DUST SEAL
RIGHT PIVOT OUST SEALS
LEFT PIVOT OUTER DUST SEAL
COLLAR
COLLAR
CHAIN SLIDER-......._,.....i
0
@--=----' - -' - \
,_,___,__-==-----
"
/ ~
SHOCK ARM PIVOT DUST SEALS
14-16
Apply grease to new dust seal lips and install them
as follows:
--shock arm pivot and swingarm right pivot dust
seals until they are flush with swingarm outer sur-
face
left pivot outer dust seal until it is seated onto
bearing
-left pivot inner dust seal until depth from swing-
arm outer surface is 4 mm (0.2 in).
Install the pivot collars as shown.
Install the drive chain slider if removed, aligning
the hole with the boss of the swingarm.
Install new slider bolts and tighten them.
TORQUE : 9 N·m (0.9 kgf.m, 6.5 lbf.ft)