Nuts, Bolts, Fasteners - Honda C8R600F4 Service Manual

MAINTENANCE
REAR SUSPENSION ADJUSTMENT
SPRING PRELOAD
The sprino preload adjuster has 7 positions.
To change the spring preload, turn the adjuster
with the pin spanner.
Position 2 is the standard position.
Position 1 is for soft spring preload.
Positions 3 to 7 are for hard spring preload.
REBOUND DAMPING
Turn the rebound damping adjuster counterclock-
wise to reduce the rebound damping force, and
turn it clockwise to increase the rebound damping
force.
To set the standard position, turn the adjuster clock-
wise until it stops, then turn it counterclockwise ap-
prox. 1 turn. Align the punch marks.
COMPRESSION DAMPING
Turn the compression damping adjuster counter-
clockwise to reduce the compression damping
force, and turn it clockwise to increase the compres-
3ion damping force.
To set the standard position, turn the adjuster clock-
wise until it stops, then turn it counterclockwise ap-
prox. 1 turn. Align the punch marks.
NUTS, BOLTS, FASTENERS
3-26
Check that all chassis nuts and bolts are tightened
to their correct torque values (page 1-11 ).
Check that all cotter pins, safety clips, hose clamps
and cable stays are in place and properly secured.
PRELOAD ADJUSTER