Combination Meter 19·6 - Honda C8R600F4 Service Manual

LIGHTS/METERS/SWITCHES
COMBINATION METER
BULB REPLACEMENT
Remove the instrument panels (page 2-5).
Remove the bolt cap and meter mounting bolt.
Remove the combination meter from the fairing
stay by sliding it downward.
Remove the bulb hole cap from the meter lower
case.
The combination
Remove the bulb from the printed circuit board by
meter may be
turning it 45° counterclockwise.
damaged if the
bulb is removed or
Install a new bulb and turn it clockwise to lock it.
1nsra11ea while rhe
Install the bulb hole cap.
ignition switch is
ON.
19-6
Install the combination meter by aligning the two
bosses with the grommets of the fairing stay.
Install the mounting bolt and bolt cap.
lnst;:ill thA instrumAnt p;:inAls (p.<igA
?-fi}_
REMOVAL/INSTALLATION
Remove the combination meter from the fairing
stay (see above).
Disconnect the connector and remove the combina-
tion meter.
Install the combination meter in the reverse order
of removal.
BULB HOLE CAP
~~'~
~',,
BULB
'