Honda C8R600F4 Service Manual page 81

Remove the oil cooler bolt (filter boss), washer and
oil cooler.
Remove the 0-ring from the oil cooler.
INSPECTION
Check the oil cooler for damage.
INSTALLATION
Coat a new 0-ring with oil and install it into the oil
cooler groove.
Apply engine oil to the oil cooler bolt threads and
seating surface.
Install the oil cooler by aligning the guide groove
with the lug on the crankcase. Install the cooler bolt
and washer with the concave of the washer ("0"
mark) facing the oil cooler.
Tighten the cooler bolt.
TORQUE :
64 N·m (6.5 kgf.m, 47 !bf.ft)
WASHER MARK
"'~
~·
0;1ooolecs;de
Connect the water hoses to the oil cooler.
Install the oil filter (page 3-12).
Fill and bleed the cooling system (page 6-4).
LUBRICATION SYSTEM
4-9