Honda C8R600F4 Service Manual page 193

Install the dowel pin and a new gasket.
Install the left crankcase cover and tighten the cov-
er bolts securely.
Connect the alternator 3P (White) connector.
Install the left side fairing (page 2-4).
Ctieck lht:: oil lt::vel and add recommended engine
oi I
if
necessary (page 3-11).
FLYWHEEL REMOVAL
Remove the left crankcase cover (page 10-2).
Remnwi thP. starter reduction gear and shaft.
Hold the flywheel with the special tool and loosen
the flywheel bolt.
TOOL:
Flywheel holder 07725-0040000 or
equivalent commercially
available in U.S.A.
Remove the flywheel bolt and special washer.
Remove the flywheel using the special tool.
TOOL:
Rotor puller 07733-0020001
or
07933-3950000
AL TERNA TOR/STARTER CLUTCH
10-3