Honda C8R600F4 Service Manual page 195

INSPECTION
Check the starter driven gear, reduction gear and
sprag clutch for abnormal wear or damage.
Measure the starter driven gear O.D.
SERVICE LIMIT: 51.684
mm (2.0348 in)
Check the inner contact surface of the clutch outer
for damage.
INSTALLATION
Apply engine oil to the sprag clutch contacting sur-
faces.
Install the sprag clutch into the starter clutch outer
as shown.
Apply locking agent to the starter clutch bolt
threads.
Install the starter clutch assembly onto the flywheel
and install the bolts.
Hold the flywheel with the special tool and tighten
the bolts.
TOOL:
Flywheel holder
07725-0040000 or
equivalent commercially
available in U.S.A.
TORQUE: 16 N.m (1.6 kgf.m, 12 lbf.ftl
ALTERNATOR/STARTER CLUTCH
10-5