Honda C8R600F4 Service Manual page 252

FRONT WHEEL/SUSPENSION/STEERING
Note the installa-
Install the ball race remover into the steering head
tion direction of
pipe as shown.
the assembly base.
Align bearing remover A with the groove in the
steering head.
Lightly tighten nut B.
While holding the driver shaft, turn nut A gradually
to remove the upper bearing outer race.
Note the installa-
Install the ball race remover into the steerinQ head
tion direction of
pipe as shown.
the assembly base.
Align bearing remover S with the groove in the
steering head.
13-24
Lightly tighten nut 8.
While holding the driver shaft, turn nut A gradually
to remove the lower bearing outer race.
NUTS
/
REMOVERAJ
SHAFT-----
ATIACHMENTA
~
ATIACllMENTD
NUTS
/
NUTA
NUTA
/
RASE
UPPER BEARING
OUTER RACE
ATIACHMENTB
BASE