Honda C8R600F4 Service Manual page 268

REAR WHEEL/SUSPENSION
14-8
Install the brake disc onto the right wheel hub.
Install new disc bolts and tighten them in a criss-
cross pattern in 2 or 3 steps.
TORQUE :
42 N·m (4.3 kgf·m, 31 !bf.ft)
Apply grease to a new dust seal lip and install it un-
til it is flush with the hub.
INSTALLATION
Apply grease to the groove in the side collar inner
surface.
Install the side collars.
Make sure that the rear brake caliper is in position.
Place the rear wheel in the swingarm and install the
drive chain over the driven sprocket.
Insert the rear axle from the left side through the
swingarm, wheel and caliper bracket.
Install the washer and axle nut.
Adjust the drive chain slack (page 3-16).