Setup Procedure Before Starting Operation - Mitsubishi FX3U-4AD User Manual

FX /FX /FX PLC User's Manual - Analog Control Edition
3G 3U 3UC
FX -1DA-BD (1-channel analog Output)
3G
1.2

Setup Procedure Before Starting Operation

Before starting analog output using the 1DA-BD, follow the procedure below to set up the system:
FX
Specifications check
System configuration and selection
Programming
Changing of output characteristics
If the error status data or the output analog value
is abnormal, refer to Chapter 6 "Troubleshooting."
G-4
-1DA-BD
3G
Refer to Chapter 1.
Outline
Refer to Chapter 2.
Refer to the common
pages.
Refer to Chapter 3.
Wiring
Refer to Chapter 4.
Refer to Chapter 5.
1.2 Setup Procedure Before Starting Operation
Outline of system:
• Compatible PLC version number
• Compatible programming tool version number
Specifications:
• Operation environment
• Performance specifications
• Output characteristics
System configuration:
(Refer to the common pages for analog control.)
• Selection of units
Wiring:
• Power supply line
• Analog output line
Programming:
• Details of special devices
• Examples of basic programs
Method of output characteristics change
1 Outline