Setup Procedure Before Starting Operation - Mitsubishi FX3U-4AD User Manual

FX /FX /FX PLC User's Manual - Analog Control Edition
3G 3U 3UC
FX -4DA (4-channel Analog Output)
3U
1.2

Setup Procedure Before Starting Operation

Before starting to use the FX
FX
Check specifications
System configuration and selection
Analog data output (test program)
Buffer memory (BFM) check
When the table output function is used
Adjustment of output characteristics
Program edit
If the error status data or the output analog value
is abnormal, refer to Chapter 9 "Troubleshooting."
E-4
-4DA, follow the procedure below to set up the system:
3U
-4DA
3U
Refer to Chapter 1.
Outline
Refer to Chapter 2.
Refer to the common
pages.
Refer to Chapter 3.
Wiring
Refer to Chapter 4.
Refer to Chapter 5.
Refer to Chapter 6.
Refer to Chapter 7.
Refer to Chapter 8.
1.2 Setup Procedure Before Starting Operation
Outline of system:
• Version number of compatible PLC
• Version number of compatible
programming tool
Specifications:
• Operation environment
• Performance specifications
• Output characteristics
System configuration:
(Refer to the analog control common
pages.)
• Selection of units
Wiring:
• Power supply line
• Analog output line
Output mode specification:
• Output mode specification program for
channel 1 to 4
Buffer memory:
• Buffer memory read/write method
• List of buffer memories
• Details of buffer memory
Table output function:
• Preparation of data table
• Transfer of data table to buffer memory
• Execution of table output function
Adjustment of output characteristics:
• Output characteristics change procedure
Program edit:
• Basic program
• Convenient function program
1 Outline