Mitsubishi FX3U-4AD User Manual page 239

FX /FX /FX PLC User's Manual - Analog Control Edition
3G 3U 3UC
FX -4DA (4-channel Analog Output)
3U
(8) Output update time unit and point-to-point interpolation method (number of data items: 1)
Set the unit of the output update time and the point-to-point interpolation method for each point.
The output update time unit and the point-to-point interpolation method for the n-th point are applied
between the n-th point and the (n+1)-th point.
When the pattern is repeated, the output update time unit and the point-to-point interpolation method are
applied between the final point and the first point.
When the pattern is not repeated, the output update time unit and the point-to-point interpolation method
for the final point are ignored.
A 4-digit hexadecimal number, H
H
Invalid*
Invalid*
• Setting of output update time unit
Set value
0
1
2
3
Other than above
values
• Interpolation method
Data output between points are interpolated every 1 ms and automatically updated.
Set value
0
1
2
Other than above
values
• S-shaped interpolation
Output data
D/8
D
D/8
D/2
* When a value out of the setting range is set, the error code is stored in the table output error code BFM #90,
the device number or the buffer memory that has developed the table output error is stored in BFM #91,
and b8 of the error status BFM #29 is turned on.
, is allocated as shown below.
Output updating time unit
Point-to-point interpolation method
Output update time unit
10 ms
100 ms
1 s
1 min
Invalid*
Interpolation method
No interpolation (Output data is held to the next point.)
Linear interpolation (Data output between points are
interpolated in the shape of a straight line.)
S-shaped interpolation (Data output between points are
interpolated in the shape of an S-shaped as shown
below.)
Invalid*
Point n
T/4 T/4 T/4
T
Point n+1
Time
T/4
6 Table Output Function
6.2 Preparation of data table
E-41
A
B
C
D
E
F
G
H
I
J