Outline - Mitsubishi FX3U-4AD User Manual

FX /FX /FX PLC User's Manual - Analog Control Edition
3G 3U 3UC
FX -4AD-PNK-ADP (4-channel Resistance Thermometer Data Input)
3U
1.

Outline

This chapter describes the outline of FX
1.1 Outline of Functions
The FX -4AD-PNK-ADP is an analog special adapter. Connect the FX
3U
FX Series PLC to read the data from the 4-channel resistance thermometer.
3UC
1) Up to 4 PNK-ADP units can be connected to the FX
*1
Up to 2 PNK-ADP units can be connected to the FX
(Including other analog special adapters)
2) Thermometer types Pt1000 and Ni1000 can be connected. (However, it's impossible to use both types
Pt1000 and Ni1000 with 1 adapter.)
3) The temperature data will be automatically written to the special data register of the FX
Series PLC.
FX , FX Series PLC : 4 maximum
3U 3UC
*1
FX Series PLC : 2 maximum
3G
(including other analog special adapters)
4th 3rd 2nd
adapter adapter adapter
Analog data
Resistance thermometer sensor type
Pt1000 and Ni1000
Description
Temperature measurement
Setting of temperature unit
Switching of types between
type Pt1000 and Ni1000
Setting of averaging time
Refer to the system configuration shown in the User's Manual - Hardware Edition to check the number of connectable units
and to configure the entire system.
*1. Only 1 analog special adapter can be connected to the 14-point and 24-point type main unit.
*2. The expansion board is not required when connecting with the FX
For the FX Series PLC a connector conversion adapter is used.
3G
-4AD-PNK-ADP (referred to as PNK-ADP).
3U
System
FX
+
+
Expansion
1st
*2
board
adapter
Transfer direction
1st adapter M/D8260 to M/D8269
2nd adapter
3rd adapter
4th adapter
-4AD-PNK-ADP to the FX
3U
/FX Series PLC.
3U 3UC
Series PLC.
3G
/FX /FX Series PLC
3U 3UC 3G
For FX , FX
3U 3UC
Series PLC
Special devices
M/D8270 to M/D8279
M/D8280 to M/D8289
M/D8290 to M/D8299
(D, DSS) PLC.
3UC
1 Outline
1.1 Outline of Functions
/FX
3G
/FX /FX
3G 3U
Point and section to be referred to
Number of connectable
......
units
To check the connectable
......
PLC model number, refer
to Section 1.3.
For a detailed
......
description of wiring,
refer to Chapter 3.
For a detailed description
......
of special devices, refer to
Chapter 4.
For a detailed description
of a basic program, refer to
Section 4.9.
J-3
A
B
/
3U
C
D
3UC
E
F
G
H
I
J