Outline - Mitsubishi FX3U-4AD User Manual

FX /FX /FX PLC User's Manual - Analog Control Edition
3G 3U 3UC
FX -1DA-BD (1-channel analog Output)
3G
1.

Outline

This chapter outlines the FX
1.1 Outline of Functions
The FX -1DA-BD is an analog expansion board. Which is connectable with the FX
3G
the voltage/current data for up to 1 channel.
*1
1) Up to 2 units of 1DA-BD can be connected to the FX
(Including other analog expansion boards, analog special adapters).
2) Either "voltage output" or "current output" can be specified.
3) The D/A conversion results will be automatically output as the values to the special data register of the
FX Series PLC.
3G
*1
2 maximum
(
including other analog expansion
boards, analog special adapters.
2nd
Analog data
Inverter, etc.
Contents
Output mode
switching
Output setting data
Error status
Refer to the system configuration shown in the User's Manual - Hardware Edition to check the number of connectable units
and to configure the entire system.
*1. Only 1 analog board can be connected to the 14-point and 24-point type main unit.
-1DA-BD (referred to as 1DA-BD).
3G
System
(
1st
Connected to the option connector 1
Connected to the option connector 2
Transfer direction
1st board
2nd board
Series PLC.
3G
FX Series PLC
3G
For FX Series PLC
3G
Special devices
M/D8260 to M/D8269
M/D8270 to M/D8279
1 Outline
1.1 Outline of Functions
Series PLC to output
3G
Point and section to be
referred to
Number of connectable
......
units
To check the connectable
......
PLC model number, refer
to Section 1.3.
For a detailed
......
description of wiring,
refer to Chapter 3.
For a detailed description
......
of special devices, refer to
Chapter 4.
For a detailed description
of a basic program, refer to
Section 4.8.
G-3
A
B
C
D
E
F
G
H
I
J