Fx 3Uc -4Ad - Mitsubishi FX3U-4AD User Manual

FX /FX /FX PLC User's Manual - Analog Control Edition
3G 3U 3UC
Common Items
4.1.5 FX -4AD
3UC
Specifications
Number of input points
Analog input range
Absolute maximum input
Offset
Gain
Digital output
*4
Resolution
Ambient temperature:
25±5°C
Ambient temperature:
0 to 55°C
Time required for A/D
conversion
*4
Input characteristics
• The photocoupler is used to insulate the analog input area from the PLC.
Insulation method • The DC/DC converter is used to insulate the power supply from the analog inputs.
• Channels are not insulated from each other.
Number of I/O points
8 points (Taken from either the input or output points of the PLC.)
occupied
*1. Adjustment of the offset or gain value will not affect the resolution. In the direct indication mode, however, the
offset/gain cannot be adjusted.
*2. The offset and the gain should satisfy the following condition:
1V ≤ (Gain - Offset)
*3. The offset and the gain should satisfy the following condition:
3mA ≤ (Gain - Offset) ≤ 30mA
*4. The resolution and the input/output characteristics depend on the selected mode.
*5. If 1 or more channels use the digital filter(s), the time required for A/D conversion will be
"5 ms × number of selected channels."
Voltage input
-10V to +10V DC
(Input resistance: 200 kΩ)
±15V
*1,*2
-10V to +9V
*1,*2
-9V to +10V
With sign, 16 bits, binary
0.32mV(20V×1/64000)
2.5mV(20V×1/8000)
±0.3%(±60mV) for 20V full scale
±0.5%(±100mV) for 20V full scale
500µs × number of selected channels
When the input mode is set to "0":
+32640
+32000
-10V
0
+10V
-32000
-32640
4 Comparison of Performance Specifications
FX -4AD
3UC
Current input
4ch
-20mA to +20mA DC
4mA to 20mA DC
(Input resistance: 250 Ω)
±30mA
-20mA to +17mA
-17mA to +30mA
With sign, 15 bits, binary
1.25µA(40mA×1/32000)
5.00µA(40mA×1/8000)
±0.5%(±200µA) for 40mA full scale
Same accuracy for 4mA to 20mA input
±1.0%(±400µA) for 40mA full scale
Same accuracy for 4mA to 20mA input
*5
When the input mode is set to "6":
+16320
+16000
-20mA
0
-16000
-16320
When the input mode is set to "3":
16400
16000
0 4mA
4.1 Analog Input
A
B
*1,*3
C
*1,*3
D
E
F
+20mA
G
20mA
H
J
A-25
I