Connection Of Special Function Blocks - Mitsubishi FX3U-4AD User Manual

FX /FX /FX PLC User's Manual - Analog Control Edition
3G 3U 3UC
Common Items
3.3.2

Connection of special function blocks

FX Series
3G
A
B
• For a detailed description of the connectable special function blocks and system configuration:
The analog special function blocks shown in the table below can be connected to the FX
FX Series
Analog special function blocks for
the FX
3U
Analog special function blocks for
the FX
2N
A-20
A B
, ,
and
For a detailed description of installation, refer to the following manual
supplied with your PLC.
C
→ Refer to the FX
To connect the special adapters
adapter , refer to the previous page.
B
C
Special function
block for FX
3U
and FX
2N
→ Refer to the FX
FX -4AD, FX
3U
FX -8AD, FX
2N
FX -4AD-PT, FX
2N
3 System Configuration Drawings of Analog Products
C
represent the connecting positions.
Series User's Manual - Hardware Edition.
3G
A
or the connector conversion
Terminal block
Series User's Manual - Hardware Edition.
3G
Type
-4DA
3U
-4AD, FX -2AD, FX
2N 2N 2N
-4AD-TC, FX -2LC
2N 2N
3.3 FX3G Series PLC 3.3 FX3G Series PLC
Analog input
• Flowmeter
• Pressure sensor
• Signal converter,
etc.
Analog output
• Inverter, etc.
Temperature sensor
input
• Thermocouple
Series PLC:
3G
-4DA, FX -2DA, FX -5A,
2N 2N