_ R
POWER BRAKE VACUUM PUMP (DIESEL MODELS)
5 - 23
(4) Disconnect oil pressure sender wires at sender
(Fig. 4).
(5) Remove oil pressure sender (Fig. 4).
STEERING
PUMP
ENGINE BLOCK
J9119-74
Fig. 4 Oii Pressure Sender
Location
(6) Disconnect lubricating oil feed line from fitting
at underside of vacuum pump (Fig. 5).
VACUUM
P U M P
OIL FEED
LINE
J9105-96
Fig. 5 Oii Feed Line Connection At Pump
(7) Remove lower bolt that attaches pump assem
bly to engine block (Fig. 6).
(8) Remove bottom, inboard nut that attaches
adapter to steering pump (Fig. 6). This nut secures a
small bracket to engine block. Nut and bracket must
be removed before pump assembly can be removed
from block.
PUMP ASSEMBLY
LOWER MOUNTING
BOTTOM-INBOARD
ADAPTER BRACKET NUT
J9105-97
Fig. 6 Adapter And Pump Mounting Fastener
Location
(9) Remove upper bolt that attaches pump assem
bly to engine block (Fig. 7).
J9119-76
Fig. 7 Removing Pump Assembly Upper Mounting
Bolt