Mediant 2000 SIP User's Manual
8.9
Call Detail Report
The Call Detail Report (CDR) contains vital statistic information on calls made by the gateway.
CDRs are generated at the end and (optionally) at the beginning of each call (determined by the
parameter 'CDRReportLevel
parameter 'CDRSyslogServerIP'.
The following CDR fields are supported:
DstNumBeforeMap
RemoteRTPssrc
RedirectReason
RedirectPhonNum
Version 4.4
'
). The destination IP address for CDR logs is determined by the
Table 8-4: Supported CDR Fields
Field Name
Cid
CallId
Trunk
BChan
ConId
TG
EPTyp
Orig
SourceIp
DestIp
TON
NPI
SrcPhoneNum
TON
NPI
DstPhoneNum
Durat
Coder
Intrv
RtpIp
Port
TrmSd
TrmReason
Fax
InPackets
OutPackets
PackLoss
UniqueId
SetupTime
ConnectTime
ReleaseTime
RTPdelay
RTPjitter
RTPssrc
TON
NPI
Description
Board's Logic Channel Number
H.323/SIP Call Identifier
Physical Trunk Number
Selected B-Channel
H.323/SIP Conference ID
Trunk Group Number
Endpoint Type
Call Originator (IP, Tel)
Source IP Address
Destination IP Address
Source Phone Number Type
Source Phone Number Plan
Source Phone Number
Destination Phone Number Type
Destination Phone Number Plan
Destination Phone Number
Destination Number Before Manipulation
Call Duration
Selected Coder
Packet Interval
RTP IP Address
Remote RTP Port
Initiator of Call Release (IP, Tel, Unknown)
Termination Reason
Fax Transaction during the Call
Number of Incoming Packets
Number of Outgoing Packets
Number of Outgoing Lost Packets
unique RTP ID
Call Setup Time
Call Connect Time
Call Release Time
RTP Delay
RTP Jitter
Local RTP SSRC
Remote RTP SSRC
Redirect Reason
Redirection Phone Number Type
Redirection Phone Number Plan
Redirection Phone Number
151
8. Gateway Capabilities Description
July 2005