Table of Contents
Advertisement
•
From version 4.4 to version 4.4 or to any higher version, the device retains its configuration
(ini file), however, the auxiliary files (CPT, logo, etc.) may be erased.
When using the Software Upgrade wizard, available through the Web Interface (refer to Section
5.11.1
on page 78), the auxiliary files are saved as well.
Note: To save the cmp file to non-volatile memory, use the -fb command line switches. If the file
is not saved, the gateway reverts to the old version of software after the next reset. For
information on using command line switches, refer to Section
10.3.2 Vendor Specific Information Field
The Mediant 2000 uses the vendor specific information field in the BootP request to provide
device-related initial startup information. The BootP/TFTP configuration utility displays this
information in the 'Client Info' column (refer to
Note: This option is not available on DHCP servers.
The Vendor Specific Information field is disabled by default. To enable / disable this feature: set
the ini file parameter 'ExtBootPReqEnable'
switch (refer to
Table 10-1
details the vendor specific information field according to device types:
Tag #
220
221
222
223
224
225
229
Table 10-2
module with IP Address 10.2.70.1.
Table 10-2: Structure of the Vendor Specific Information Field
Vendor-
Specific
Information
Code
42
12
Mediant 2000 SIP User's Manual
Table B-1
on page 198).
Table 10-1: Vendor Specific Information Field
Description
Board Type
Current IP Address
Burned Boot Software Version
Burned cmp Software Version
Geographical Address
Chassis Geographical Address
E&M
exemplifies the structure of the vendor specific information field for a TP-1610 slave
220
1
2
225
B.11.6
Figure
B-1).
(Table 6-1
on page 90) or use the '-be' command line
Value
#02 = IPM-1610/TP-1610
#03 = IPMTP260
#05 = IPMTP260
XXX.XXX.XXX.XXX
X.XX
XXXXXXXXXXXX
0 – 31
(TP-260 Only)
0 – 31
(TP-260 Only)
N/A
1
1
221
4
170
Mediant 2000 SIP
on page 198.
Length
1
4
4
12
1
1
1
10
2
70
1
Document #: LTRT-72504
255
Advertisement
Table of Contents
