Table of Contents
Advertisement
In the transfer scenario there are three parties:
Party A - transferring, Party B – transferred, Party C – transferred to.
•
A Calls B.
•
B answers.
•
A presses the hookflash and puts B on-hold (party B hears a hold tone)
•
A dials C.
•
After A completed dialing C, A can perform the transfer by on-hooking the A phone.
•
After the transfer is completed, B and C parties are engaged in a call.
The transfer can be initiated at any of the following stages of the call between A to C:
•
Just after completing dialing C phone number - Transfer from setup.
•
While hearing ring back – Transfer from alert.
•
While speaking to C – Transfer from active.
Blind transfer is performed after we have a call between A and B, and A party decides to transfer
the call to C immediately without speaking with C.
The result of the transfer is a call between B and C (just like consultation transfer only skipping
the consultation stage).
The Mediant 2000 doesn't initiate call transfer, it only can respond to call transfer request.
Mediant 2000 SIP User's Manual
148
Mediant 2000 SIP
Document #: LTRT-72504
Advertisement
Table of Contents
