Table of Contents
Advertisement
Mediant 2000 SIP User's Manual
6.10 Number Manipulation and Routing Parameters
Note:
Table 6-5: Number Manipulation and Routing Parameters (continues on pages 115 to 121)
ini File Field Name
Web Parameter Name
TrunkGroup_x
[Trunk Group Table]
ChannelList
Note: It is recommended to use
TrunkGroup_x parameter
instead.
DefaultNumber
[Default Destination Number]
Version 4.4
In
Table
6-5, parameters in brackets are the format in the Embedded Web
*
Server
.
*
TrunkGroup_x = T/a-b,c,d
x = Trunk group ID (1 to 99).
T = Physical trunk number (0 to 7).
a = Starting B-channel (from 1).
b = Ending B-channel (up to 31).
c = Phone number associated with the first channel (optional).
d = Optional Tel Profile ID (1 to 5).
For example:
TrunkGroup_1 = 0/1-31,1000 (for E1 span).
TrunkGroup_1 = 1/1-31,$$,1.
TrunkGroup_2 = 2/1-24,3000 (for T1 span).
Trunk group is the recommended method to configure the gateway's B-channels.
The parameter 'ChannelList' (although still supported) mustn't be used
simultaneously with Trunk Groups.
Note: An optional Tel Profile ID (1 to 5) can be applied to each group of B-channels.
List of phone numbers, used to define the enabled B-channels for gateway operation,
'a, b, c,d'
a = first channel
b = number of channels starting from 'a'
c = the phone number of the first channel
d = Tel Profile ID assigned to the group of channels.
example: ChannelList = '0,30,1001'
Defines phone numbers 1001 to 1030 for 30 gateway channels.
The ini file can include up to ten 'ChannelList = ' entries
Usually single ChannelList parameter is enough to define the complete 8 trunk
gateway:
ChannelList = '0,240,1000'; For eight E1 spans
ChannelList = '0,192,1000'; For eight T1 CAS spans
Phone numbers can be defined individually per E1 or T1 span:
For E1 spans (CAS or ISDN): 0 to 29 for first span, 30 to 59 for second span, 60 to
rd
89 for 3
span, 90 to 119 for 4
For T1 ISDN spans: 0 to 22 for first span, 23 to 45 for second span, 46 to 68 for 3
span, and 69 to 91 for 4
For T1 CAS signaling: 0 to 23 for first span, 24 to 47 for second span, 48 to 71 for 3
span, and 72 to 95 for 4
It is suggested to use Trunk Groups in Mediant 2000 gateway to define enabled B-
channels, instead of ChannelList parameter.
Defines the telephone number that the gateway uses if the parameters
'TrunkGroup_x' or 'ChannelList' don't include a phone number. The parameter is
used as a starting number for the list of B-channels comprising all trunk groups in the
gateway.
6. ini File Configuration of the Mediant 2000
Valid Range and Description
th
span.
th
span.
th
span.
115
rd
rd
July 2005
Advertisement
Table of Contents
