Figure 5-32: Load An Ini File Screen - Nortel Mediant TP-1610 SIP User Manual

Click Cancel; the Mediant 2000 resets utilizing the cmp, ini and all other configuration
files that were previously stored in flash memory. Note that these are NOT the files you
loaded in the previous Wizard steps.
Click Back; the 'Load a cmp File' screen is reverted to; refer to
Click Next; the 'Load an ini File' screen opens; refer to
file or any other auxiliary file listed in the Wizard is optional.
Note that as you progress, the file type list on the left indicates which file type loading is in
process by illuminating green (until 'FINISH').
In the 'Load an ini File' screen, you can now choose to either:
6.
Click Browse and navigate to the ini file; the check box 'Use existing configuration', by
default checked, becomes unchecked. Click Send File; the ini file is loaded to the
Mediant 2000 and you're notified as to a successful loading.
Ignore the Browse button (its field remains undefined and the check box 'Use existing
configuration' remains checked by default).
Ignore the Browse button and uncheck the 'Use existing configuration' check box; no ini
file is loaded, the Mediant 2000 uses its factory-preconfigured values.
You can now choose to either:
Click Cancel; the Mediant 2000 resets utilizing the cmp, ini and all other configuration
files that were previously stored in flash memory. Note that these are NOT the files you
loaded in the previous Wizard steps.
Click Reset; the Mediant 2000 resets, utilizing the new cmp and ini file you loaded up to
now as well as utilizing the other configuration files.
Click Back; the 'Load a cmp file' screen is reverted to; refer to
Click Next; the 'Load a CPT File' screen opens, refer to
CPT file or any other auxiliary file listed in the Wizard is optional.
Mediant 2000 SIP User's Manual

Figure 5-32: Load an ini File Screen

80
Mediant 2000 SIP
Figure 5-30.
Figure 5-32. Loading a new ini
Figure 5-30.
Figure 5-33; Loading a new
Document #: LTRT-72504