Table of Contents
Advertisement
Note 2: If not specified, the ptime gets a default value.
Note 3: The ptime specifies the maximum packetization time the gateway can receive.
Repeat steps 3 and 4 for the second to fifth coders (optional).
5.
Repeat steps 2 to 5 for the second to forth coder groups (optional).
6.
Click the Submit button to save your changes.
7.
To save the changes so they are available after a power fail, refer to Section
8.
84.
Note:
5.8.5.2
Tel Profile Settings
Use the Tel Profile Settings screen to define up to four different Tel Profiles. These Profiles are
used in the 'Trunk Group' table to associate different Profiles to gateway's B-channels, thereby
applying different behavior to different Mediant 2000 B-channels.
To configure the Tel Profile settings, take these 8 steps:
Open the 'Tel Profile Settings' screen (Protocol Management menu > Profile Definitions
1.
submenu > Tel Profile Settings option); the 'Tel Profile Settings' screen is displayed.
In the 'Profile ID' drop-down list, select the Tel Profile you want to edit (up to four Tel Profiles
2.
can be configured).
Mediant 2000 SIP User's Manual
In the current version, only the ptime of the first coder is sent in the SDP
section of the Invite message.
Figure 5-10: Tel Profile Settings Screen
56
Mediant 2000 SIP
5.12
on page
Document #: LTRT-72504
Advertisement
Table of Contents
