Table of Contents
Advertisement
Mediant 2000 SIP User's Manual
Click the Browse button that is in the field for the type of file you want to load.
2.
Navigate to the folder that contains the file you want to load.
3.
Click the file and click the Open button; the name and path of the file appear in the field
4.
beside the Browse button.
Click the Send File button that is next to the field that contains the name of the file you want
5.
to load. An exclamation mark in the screen section indicates that the file's loading doesn't
take effect on-the-fly (e.g., CPT file).
Repeat steps 2 to 5 for each file you want to load.
6.
Note 1:
Note 2:
To save the loaded auxiliary files so they are available after a power fail, refer to Section
7.
5.12
on page 84.
To reset the Mediant 2000, refer to Section
8.
5.11.3 Updating the Software Upgrade Key
Mediant 2000 gateways are supplied with a Software Upgrade Key already pre-configured for
each of its TrunkPack Modules (TPM).
Users can later upgrade their Mediant 2000 features, capabilities and quantity of available
resources by specifying what upgrades they require, and purchasing a new key to match their
specification.
The Software Upgrade Key is sent as a string in a text file, to be loaded into the Mediant 2000.
Stored in the device's non-volatile flash memory, the string defines the features and capabilities
allowed by the specific key purchased by the user. The device allows users to utilize only these
features and capabilities. A new key overwrites a previously installed key.
For detailed information on the Software Upgrade Key, refer to
Version 4.4
Figure 5-36: Auxiliary Files Screen
Saving an auxiliary file to flash memory may disrupt traffic on the Mediant
2000. To avoid this, disable all traffic on the device before saving to flash
memory.
A device reset is required to activate a loaded CPT file, and may be required
for the activation of certain ini file parameters.
5.12
on page 83.
Appendix H
83
5. Web Management
on page 223.
July 2005
Advertisement
Table of Contents
