Creating A Loadable Prerecorded Tones File; Figure G-6: Prerecorded Tones Screen - Nortel Mediant TP-1610 SIP User Manual

G.1.4

Creating a Loadable Prerecorded Tones File

For detailed information on the PRT file, refer to Section
To create a loadable PRT dat file from your raw data files, take these 7
steps:
Prepare the prerecorded tones (raw data PCM or L8) files you want to combine into a single
1.
dat file using standard recording utilities.
Execute the TrunkPack Downloadable Conversion utility, DConvert240.exe (supplied with
2.
the software package); the utility's main screen opens (shown in
Click the Process Prerecorded Tones File(s) button; the Prerecorded Tones File(s) screen,
3.
shown in
To add the prerecorded tone files (you created in Step 1) to the 'Prerecorded Tones' screen
4.
follow one of these procedures:
Select the files and drag them to the 'Prerecorded Tones' screen.
Mediant 2000 SIP User's Manual
Figure G-3, opens.

Figure G-6: Prerecorded Tones Screen

7.2 on page 137.
218
Mediant 2000 SIP
Figure G-1).
Document #: LTRT-72504