Table of Contents
Advertisement
H.3.1
Loading the Software Upgrade Key Using the Embedded Web
Server
To load a Software Upgrade Key using the Web Server, take these 5
steps:
Access the devices Embedded Web Server (refer to Section
1.
Click the Software Update button.
2.
Click the Software Upgrade Key tab; the Software Upgrade Key screen is displayed (shown
3.
in
Figure
When loading a single key S/N line to a device:
4.
Open the Software Upgrade Key file (it should open in Notepad), select and copy the key
string of the device's S/N and paste it into the Web field New Key. If the string is sent in the
body of an email, copy and paste it from there. Press the Add Key button.
When loading a Software Upgrade Key text file containing multiple S/N lines to a device
(refer to
Click the Browse button in the Send "Upgrade Key" file from your computer to the
device field, and navigate to the Software Upgrade Key text file.
Click the Send File button.
The new key is loaded to the device, validated and if valid is burned to memory. The new
key is displayed in the Current Key field.
Validate the new key by scrolling through the 'Key features:' panel and verifying the
presence / absence of the appropriate features.
After verifying that the Software Upgrade Key was successfully loaded, reset the device; the
5.
new capabilities and resources are active.
Mediant 2000 SIP User's Manual
H-1).
Figure
H-2):
Figure H-1: Software Upgrade Key Screen
224
Mediant 2000 SIP
5.5
on page 40).
Document #: LTRT-72504
Advertisement
Table of Contents
